MICROPHONES
Categories
• Complete ready to use mic set • 6M Cable XLR male/female 6M • Microphone with on/off switch • D8301 Microphone stand • Clamp: Flexible rubber MICROPHONE • Switch: On / Off • Element: Moving Coil Dynamic • Polar pattern: Cardioid • Frequency response: 50Hz – 15Khz •..
Send a request
FEATURES • This is cardioid dynamic microphone with electronic circuit control, ''easy to use'' design, , plug and play. • High sensitivity output, low noise, wide dynamic range, etc. • Microphone can be used on common systems including WINDOWS, LINUX, etc. TECHNICAL PARAMETERS Soun..
Add to Cart
• Material: Iron • Finished: Spray painting • Boom Length: 80cm • Hightest Height: 188cm • Tube: 10 mm / 13 mm / 19 mm • Diameter of tripod base: 60 cm • Two microphone clip is included..
Add to Cart
The Gmusic microphone stand can be used as a table stand or as a stand for amplifiers or bass drums. Compatible with any standard microphone. It has a flexible gooseneck. FEATURES • Base diameter: 116 mm • Height: 400 mm • Material: Steel • The microphone clip is included • Weight: 0...
Add to Cart
The Gmusic microphone stand can be used as a table stand or as a stand for amplifiers or bass drums. Compatible with any standard microphone. It is adjustable in height and has a flexible gooseneck. FEATURES • Base diameter: 128 mm • Height: From 430 to 545 mm • Material: Steel • ..
Add to Cart
The Gmusic microphone stand can be used as a table stand or as a stand for amplifiers or bass drums. Compatible with any standard microphone. It is adjustable in height and comes with microphone clip. FEATURES • Base diameter: 106 mm • Height: From 280 to 400 mm • Material: St..
Add to Cart
Gmusic MIS06 is a small microphone stand that can be used for amplifier, bass drum or any other purpose where the standard microphone stand is too large Compatible with any standard microphone. FEATURES • Base diameter: 40 cm • Height: 93 cm • Material: Steel • Tube diameter: 1.5 / 2 cm • ..
Add to Cart
• 25 cm round base • Height: 80-160 cm • Weight: 2 kg • Color: Black..
Add to Cart
• Material: Iron • Finished: Spray painting • Boom Length: 80cm • Hightest Height: 188cm • Tube: 10 mm / 13 mm / 19 mm • Diameter of tripod base: 60 cm • Microphone clip is included..
Add to Cart
For stands with diameter of up to 30 mm. Double nylon screen for superior performance. Unobtrusive black round filter frame. Non-marring locking screw prevents scratching of mic stand. FEATURES • Goose neck diameter: 8 mm • Goose neck length: 350 mm • Material: Steel • Screw-on to: Tube dia..
Add to Cart
• Sturdy holder for bottles, glasses and mugs with max. Ø 85 mm • Clamp fits tubes with up to Ø 30 mm • Weight: 0.25 kg • Black..
Add to Cart
The industry standard for a mic stand and boom arm combination. Package consists of the 201A/2 microphone stand and the 211 boom arm. Folding base for ease of transport. Long legs for added stability. The 210/2 - a classic for 30 years. More than 2 million sold. FEATURES • Boom arm: On..
Add to Cart
The industry standard for a mic stand and boom arm combination. Package consists of the 201A/2 microphone stand and the 211 boom arm. Folding base for ease of transport. Long legs for added stability. The 210/2 - a classic for 30 years. More than 2 million sold. FEATURES • Boom arm: On..
Add to Cart
A more compact version of the classic 210/2. The combination of the long-legged 201A/2 mic stand and the 211/1 telescopic boom arm. Like the 210/2, the 210/9 sets the standard for professional microphone boom stands. FEATURES • Boom arm: 2-piece telescopic design • Boom arm clam..
Send a request
• Boom arm: One-piece design • Boom arm clamping: Wing nut • Boom arm length: 805 mm • Height: From 900 to 1,600 mm • Height adjustment: Clutch • Leg construction: Socket with foldable legs • Material: Steel • Product Category: Baseline • ..
Send a request
Classic one-piece boom arm with 3/8" thread, and sliding adjustment through non-scratching swivel joint. Easy tightening with T-bar locking screw. Complete with locking washer and plastic handgrip. FEATURES • Boom arm: One-piece design • Boom arm length: 800 mm • Clamping..
Add to Cart
Classic one-piece boom arm with 3/8" thread, and sliding adjustment through non-scratching swivel joint. Easy tightening with T-bar locking screw. Complete with locking washer and plastic handgrip. FEATURES • Boom arm: One-piece design • Boom arm length: 800 mm • Clamping..
Send a request
Boom arm 2-piece telescopic design Boom arm length From 425 to 725 mm Clamping Wing nut Material Steel Threaded connector 3/8" Type Black Weight 0.58 kg..
Send a request
Male thread: 5/8" 27 gauge Material: Steel Type: Zinc-plated Weight: 0.01 kg..
Add to Cart
• Height: 60 mm • Leg construction: Foldable legs • Material: Plastiksockel/ Stahlfüsse • Threaded connector: 3/8" • Type: Black • Weight: 0.12 kg..
Add to Cart
Height 70 mm Leg construction Foldable legs Material Plastic Special features Can be used as microphone handle Threaded connector 1/4" or 3/8" Type Black Weight 0.068 kg..
Add to Cart
The telescopic microphone stand with a 3/8“ threaded connector is extremely versatile. Its height can be adjusted from 230 to 400 mm using the practical clamping lever. This light-weight three-legged stand with folding legs is suitable for mobile operation. The robust foot end caps provide stability..
Add to Cart
Length 217 mm Material Steel Number of knurled screws 2 pieces Special features moveable bars on both sides to position the microphone; no parts to lose; connects to top of mic stands with 3/8" thread Threaded connector 3/8"..
Add to Cart
Length 200 mm Material Aluminum Number of knurled screws 2 pieces Spacing of holes From 60 to 172 mm Special features No parts to lose; connects to top of mic stands with 3/8" thread Threaded connector 3/8" ..
Add to Cart
