The wireless device transmits a high quality signal over a distance of up to 30 m. The integrated battery then lasts up to five hours of operation on a single charge, charging is via a USB port and you can see its lifetime on the four-stage LED strip. Both the transmitter and receiver have an XLR connector for connection to a microphone, mixer or microphone preamp.

• Abuilt-in rechargeable lithium battery
• Transmission distance > 30 meters
• It adopts 5.8GHz ISM frequency band
• 4 switchable channels
• Delay time < 5ms
• 24bit Audio Resolution with Sampling Frequency of 48K

Specifications

MW-1 receiver

• Power supply mode: built-in lithium battery
• Cell capacity: 3.7V 400mAh
• Reception Sensitivity: -85dBm
• Received frequency: 5.8GHz frequency
• Anti-jamming method: Frequency hopping
• Signal Distortion: <0.02%
• Gain: 0 dB
• SNR: 105dB
• Frequency response: 20Hz- 20KHz
• Delay time: <5ms
• Sampling rate: 24-bit /48KHz
• Output Impedance: 680Ω
• Port's type: XLR male port

MW-1 transmitter

• Power supply mode: built-in lithium battery
• Cell capacity: 3.7V 400mAh
• Transmission power: 7dBm
• Working frequency: 5.8GHz frequency
• Anti-jamming method: Frequency hopping
• Frequency response: 20Hz- 20KHz
• Delay time: <5ms
• Sampling rate: 24-bit /48kHz
• lnput Impedance: 3.3K
• Port's type: XLR female port
• Battery life 4hrs-5hrs